BALANCES/WEIGHTS

BALANCES








ZES 35. Springe Balance Metric : Flat form with zero adjustable device having anodized metal scale, metal parts richly plated in high impact polystyrene body. Suspension loop at top and load hook at the lower head. Individually packed in a beautiful cardboard box.

Capacity :

(a) 50gm.

(b) 100gm.

(d) 500gm.

(e)1000gm.

(f) 2000gm.









ZES 36. Springe Balance Flat Type : Flat type accurate with brass scale, ring for suspension and hook for hanging weights.
Capacity :	(a) 2kg.	(b) 5kg.	(c) 10kg.	(d) 25kg.








ZES 37. Double Beam Balance : Two pan balance for accurate and rapid weighing upto 2 kg. when used with supplementary masses. The balance has two beams with center indicating sliding masses to weigh upto 210gm, spring loaded zero adjust compensatory and magnetic damping. Stainless steel pans are of 150mm dia.

BEAM :	0 x 200 gm x 10gm
	0 x 10gm x 0.1gm.
Capacity / Readability :	(a) 210 / 0.1gm
	(b) 210 / 0.1gm with uncelebrated tare beam of 200g cap.

ZES 38. Supplementary Mass Set :

Made of M.S. : 1kgm., 500gm, 200gm & 100gm for above balance.

ZES 39. Triple Beam Balance : A single pan, low form balance that has three beams with centre indicating sliding masses giving total weighing capacity of 610gm. The capacity can be extended to 2610g. with supplementary masses. Spring loaded zero adjust compensator and magnetic damping are provided. Stainless steel pan is of 150 mm diameter.
Beams :	0-500g x 100g	0-100g x 10g	0-10g x 0.1g


Capacity / Readability :
(a) 610gm / 0.1gm.
(b) 610gm / 0.1gm with uncalibrated tare beam of 200g cap.
(c) 2610gm / 0.1gm.
(d) 2610gm / 0.1gm with uncalibrated tare beam of 200g cap.









ZES 40. Four Beam Balance : A highform balance with four beams each provided with a non removable sliding mass, has total weighing capacity of 311g. No additional mass is required. Provided with spring loaded zero adjust compensator and magnetic damping, it has a pan of 90mm diameter with two pouring spouts and handle. Height of stirrup approximate 180mm. A platform housed in the base can be used for density determination.

BEAM :

0-200gm x 100gm

0-100gm x 10gm

0-10gm x 1gm

0-1gm x 0.01gm









ZES 41. Weight Set : Made of brass, accurately adjusted within B- grade tolerence. Set consists of 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2 x 2g, 1 x 1g and fractional weights from 1mg to 500mg. Housed in wooden box with forceps.









ZES 42. Weight Set : All weights are machined brass, accurately adjusted with in B-grade tolerances and marked. Housed in a wooden box.
Specification:
Set of twelve weights :	Set of ten weights :	Set of nine weights :
1 x 500 gm, 2 x 200 gm, 1 x 100 gm, 1 x 50 gm, 2 x 20 gm, 1 x 10 gm, 1 x 5 gm, 2 x 2 gm, 1 x 1 gm.	1 x 200 gm, 1 x 100 gm, 1 x 50 gm, 1 x 20 gm, 1 x 10 gm, 1 x 5 gm, 2 x 2 gm, 1 x 1 gm.	1 x 500 gm, 2 x 200 gm, 1 x 100 gm, 1 x 50 gm, 2 x 20 gm, 1 x 10 gm, 1 x 5 gm.









ZES 43. Slotted Weights With rack Made of machined brass, finely adjusted and marked. Provided with 4mm slot to fit mass hanger. Arranged on a metal rack with handle.
Specification:

Set of twelve weights :	Set of ten weights :	Set of eight weights :
1 x 500 gm, 2 x 200 gm, 1 x 100gm, 1 x 50gm, 2 x 20gm, 1 x 10gm, 1 x 5gm, 2 x 2 gm, 1 x 1gm.	1 x 500 gm, 5 x 100 gm, 1 x 50 gm, 2 x 20 gm, 1 x 10 gm	1 x 500 gm, 2 x 200 gm, 1 x 100 gm, 1 x 50 gm, 2 x 20 gm, 1 x 10 gm.

ZES 44. Slotted Weights on Carrier :

Made of machined brass. Each set consists of nine weights and a carrier of the same weight.

Specifications:

Set of 100gm total weight 1000gm

Set of 50gm total weight 500gm

Set of 20gm total weight 200gm

Set of 10gm total weight 100gm

ZES 45. Slotted Weights on Carrier :

The set consists of nine weights each of 500gm and a carrier of the same weight. Made of iron and stove and enameled black.









ZES 46. Weights, Hexagonal : Made of cast iron with suspension ring.