Analogue Meter / Demonstration Meter / Ballistic GalvanometerVoltameters

KEYS / KNIFE SWITCH

ZES 150. Plug Key, One Way :

Thick brass block of 9mm fitted on heavy Bakelite base provided with all brass terminals and brass screws.

ZES 151. Plug Key, Two Way :

Same as above

ZES 152. Plug Key, Three Way :

On bakelite base with brass terminals.

ZES 153. Plug Key Four Way :

On bakelite base with brass terminals.

ZES 154. Knife Switch Single :

Single pole, double throw, mounted on bakelite base.

ZES 155. Knife Switch Double :

Double pole, double throw, mounted on bakelite base.

ZES 156. Reversing switch :

Rotary brush, type switch with phosphor-bronze contacts. Screw terminals. Maximum current 10A. Mounted on an insulating base.

ZES 157. Pohls Commutator :

Used in experiments on hystersis. The thick brass sheet contact arms and the joining strips are fitted on Bakelite base. Operation of the contact arm is done with Bakelite handle. The terminals are provided on the sides of the square base. Max current 5 Amp but supplied without mercury.

ZES 158. Charge & Discharge Key :

Used for charging & discharging of a capacitor. Nikel plated brass strips & pillars are used. Three terminals for connections fitted on a thick Bakelite plate.

Contact Resistance 2 milli ohm approx.

Max Current 5 Amps.

ZES 159. Raleighs Key :

Fitted on thick Bakelite bases with all brass parts.

ZES 160. Tapping Key Single :

Brass strip with insulated knob and terminals mounted on a Bakelite plate of high insulation.

Contact Resistance 2 milli ohm approx.

Maximum Current 5 Amps.

ZES 161. Tapping Key Double :

Two brass strip & four terminals mounted on a Bakelite plate of high insulation.

Contact Resistance 2 Milli ohm Approx.

Maximum Current 5 Amps.

ZES 162. Morse Key :

Heavy model on Bakelite base.

ZES 163. Carry Foster Key :

Fitted on bakelite plates with brass C.P.Cup.

HOME

ABOUT US

PRODUCT RANGE

FEEDBACK FORM

Analogue Meter / Demonstration Meter / Ballistic Galvanometer Voltameters