Pneumatics & HydrostaticsKeys / Knife Switch

ANALOGUE METER (MOVING COIL TYPE)

ZES 118. Moving Coil DC :

MO65EDM

 
Round dial  
Accuracy 2.5% fsd  
Scale Length 50mm approx.  
MSR65EDM  
Square dial  
Accuracy 2.5% fsd  
Scale length 60mm approx.  
MR100EDM  
   
Rectangular dial  
Accuracy 1.5% fsd  
Scale length 85mm approx.  
Ranges Available :
 
AMMETER 0-1A, 1.5A, 3A, 5A, 10A, 15A
MILLIAMMETER 0-1mA, 5mA, 10mA, 25mA, 50mA, 100mA, 200mA, 500mA.
MICROAMMETER 0-50uA, 100uA, 200uA, 250uA, 300uA, 500uA.
MILLIVOLTMETER 0-20mV, 50mV, 75mV, 100mV, 200mV, 300mV, 500mV.
VOLTMETER 0-1V, 1.5V, 3V, 5V, 10V, 25V, 30V, 50V, 60V, 75V, 100V, 150V, 250V, 300V, 500V, 600V.
NOTE : Moving Coil Meters can be supplied incorporating rectifier for AC use in the above models. Double ranges meter can also be supplied as per your requirements.

ZES 119. Meter Desk Stand :

All Bakelite / ABS mounded in conveniently inclined face fitted with two terminals and lead wires.

(a) Old type model with terminals on the top of the stand.

(b) New type model with superior quality lock type terminals at the bottom of the stand.

ZES 120. Multimeter AnalogUe :

Low cost moving coil multimeter for a.c/ d.c. and resistance measurement, having a knife edge pointer moving over a two-colour scale. With 175uA F.S.D.Sensitivity. Range selection is by pins. Test leads stay firmly in the terminals. 2, 1.5 V battery is also included.

Measuring Ranges :

D.C. VOLT

10-50-250-1Kv (4k ohms/Volt)

A.C. VOLT

10-50-250-500-1Kv (2k ohms/Volt)

D.C. mA

.025-10-250mA

Ohms

0+ 10k ohms 0-1m ohms

Centre

100 ohms 10k ohms.
Battery internal 1.5V (915 x 2)

ZES 121. Multimeter Digital 3 Digit LCD :

Ranges :

DC Voltage upto 1000 V in five ranges.

AC Voltage upto 750 V in five ranges.

DC Current upto 10 A in five ranges.

AC Current upto 10 A in five ranges

Resistance upto 200M ohms. In seven ranges.

Diode, Transistor and Continuity Check :

Basic Accuracy:

0.5 % for DC Voltage

1 % for AC Voltage

1 % for DC Current

1.2% for AC Current

0.8% for Resistance

Power Source: One 9V battery type eveready216 or equivalent.

Battery Life : 200 Hours

Dimensions : 170 x 84 x 38 mm.

Weight 250 Grms. Approx.

DEMONSTRATION METER

ZES 131. Demonstration Meter :

A demonstration meter and may be converted to an a.c. or d.c. Voltmeter or ammeter with selection of ranges for each mode of operation by using one of a series of interchangeable dials which fit through a slot in the side of the case. The movement, comprising a high grade moving coil galvanometer, is housed within a robust, hardwood case and all the working parts are clearly visible through the front and rear glass panels. Scales are marked on both sides of each dial. A zero adjustment permits instrument to be used for centre working.      Accuracy 2.5 % F.S.D.

ZES 132. Interscale for Demonstration Meter :

A plastic panel 313 x 117 mm with sealed moulded box at one end which contains the shunt voltage multiplier appropriate to the scale.

A.C. or D.C. Current :

(a) 0-10mA  (b) 0-50mA (c) 0-100mA (d) 0-500mA (e) 0-1A (f) 0-5A (g) 0-10A

A.C. or D.C. Voltage :

(a) 05 V (b) 010 V (c) 015 V (d) 050 V

Note : Other ranges also available on request.

BALLISTIC GALVANOMETER

ZES 137. Ballistic Galvanometer :

For measurement of small quantities of electrical charge. Reflecting mirror type model. The moving coil is suspended by a phosphor bronze strip, which carries an optically true concave mirror. The coil can be raised or lowered or set to zero by an adjusting knurled knob at the top. A knob at the back is provided for clamping and releasing the coil. A link high resistance is provided to make the galvanometer periodic, if desired, levelling screws are provided for balancing the coil.

TYPE RESISTANCE OF COIL PERIOD SENSITIVITY

(a) 100 ohms 10-12 sec. 180 mm

(b) 500 ohms 10-12 sec. 400 mm

ZES 138. D Arsonal Galvanometer :

Inexpensive but sensitive instrument for null detection. Bakelite case with tripod stand having one long foot for supporting the scale. Two levelling screws for balancing the coil. clamp and free arrangement for transportation. Fine zero adjuster at the top. 200 ohms resistance coil suspended with phosphor-bronze alloy suspension strip. Can be supplied with 50 cms focus concave mirror without scale for use with lamp and scale.

ZES 139. Spot Galvanometer :

Very popular for use as a null detector for potentiometric set-ups and bridges. Housed in Bakelite case with lamp and scale arrangement. Taut band type movement. Movement sufficiently protected against shocks. Alcomax magnet properly aged for high stability.clamp 150 mm ;long, easy replacement for lamp. Operated at mains 220 volts a.c. or 6 volts d.c. band switch for 5 shunt powers 1, 1/10, 1/100, 1/1000 and short circuit. Dimensions overall 220x225x132 mm approx.

RESISTANCE PERIOD DAMPING RESISTANCE

(a) 125 Ohms 2 Sec. 1000 ohms

(b) 600 Ohms 2 Sec. 7000 ohms

ZES 140. LAMP AND SCALE ARRANGEMENT :

Suitable for use with reflecting galvanometer Lamp housing is provided with universal adjustment in any direction and fitted with 6 volts lamp which is workable on 230 votls a.c. with the help of transformer stepdown provided in base duco finish or workable with 6 volts accumulator for this two terminals are provided on the base. To have quick and accurate focusing rack and pinion is provided. The universal lamp and scale is fitted on heavy base with chrome plated rod. Complete with Perspex scale calibrated in mm 250-0-250 mm and 0-500 mm. The scale carrier is the new improved design permitting lateral adjustment and provides full scale view over the entire length.

HOME

ABOUT US

PRODUCT RANGE

FEEDBACK FORM

Pneumatics & Hydrostatics Keys / Knife Switch